Потолочные щелевые диффузоры DSC-PLASTER
Fields of application
The ceiling slot diffuser of type DSC-PLASTER by SCHAKO is suitable for use in rooms from 2.6 m to 4 m high for direct installation in plaster board ceilings or ceiling cavities (pressure ceilings).
The special shape of the frame profile allows good installation in the plaster board ceiling. Filling in Q3 quality is possible up to the air outlet slot. The proven clamp strap fastening allows easy mounting in the plaster board ceiling.
The air deflection blades adjustable from below allow a variety of throw adjustment options. Thus, the air outlet direction in the cooling mode can be adjusted in a one- or two-way manner. This achieves maximum induction while the temperature and velocity are effectively reduced.
The ceiling slot diffuser can be ordered as 1- or 2-slot model and is available either as a single piece or in band design.
The large free cross-section allows a high air throughput compared with other slot diffusers. The stable supply air jet and high induction means that SCHAKO DSC-PLASTER slot diffuser can be used in cooling mode up to T0 ≤ 8 K.
The resistance created by the blades ensures for SCHAKO DSC-PLASTER that the supply air is distributed equally across the whole length of the slot diffuser both in a single-piece model and in band design.
Due to the central housing of the blades, the free cross-section is always the same. Accordingly, when the blades are adjusted, the pressure loss and sound power level remain constant.
A subsequent change of the air outlet direction on-site is possible at any time because the air deflection blades of SCHAKO DSC-PLASTER can be easily adjusted from the outside as is usual for SCHAKO products.
If a certain air throw pattern is ordered, then it is preset ex-factory.
Volumetric flow range
60 - 120 m³/h pro Meter Schlitz, Einsatz in VVS-Anlagen von 100 - 40 %